Converter

Key Specifications/Special Features:

• Overview:
  • FBPC100 series gives the interface conversion between g.703 e1 and v.35
  • This device provides an economical digital access solution for e1 and fractional e1 network services
  • With a adapter cable, the device can link to other dte device, such as router, at data rates of 64 to 2048kbps
  • User data is placed into the e1 frame, using only the required number of times lots
  • Times lot assignment is accomplished according to the data port speed and manual setting of dip switches
  • FBPC100 series is widely used in communication network, both in WAN and LAN connection field
• Management:
  • Supports console, web and snmpmanagement
  • Provide timing mode setting, loop back mode setting, framed or unframed mode setting clock resources selection, and etc
  • Provide environment parameter monitoring, including power supply status and device operation temperature
  • Show details of system information, including chassis name, location information, ip address, start-up time, software and hardware version
  • View and configure the working status of local and remote device, including connection status, port status
  • Provide user management to ensure the device operation security
• Specifications:
  • E1 ports
  • Compliant with: itu-t, 703, 704 and 823
  • Rate: 2.048MBps
  • Code type: Hdb3
  • Impedance: 75 Ohms unbalanced and 120 ohm balanced optional
  • Physical connector: BNC for unbalanced and rj45 for balanced
• V.35 interface:
  • Compliant with v.35 standard
  • Rate: n x 64KBps n=132
• Physical connector: db25 female jack
• DCE and DTE optional
• Ethernet ports
• Compliant with: ieee802.3, 802.3u, 802.3x
• Rate: 10Mbps, half/full auto-negotiation
• Auto MDI/MDI-x
• Physical connector: rj45
• Environment:
  • Operation temperature: 0 to 50 degrees Celsius
  • Operation relative humidity: 0 to 90%
  • Store temperature: -20 to 65 store
  • Relative humidity: 0 to 95%